|
|
| |
Switching Mode Power Supply  |
| LTE 120F SERIES 80W/120 DUAL OUTPUT SWITCHING POWER SUPPLY |
| INPUT / OUTPUT SPECIFICATION |
- VOLTAGE :
90-264 VAC, Universal
- FREQUENCY :
47-63
- CURRENT :
1.6 ARMS. MAX. @115VAC 122W LOAD
0.8 ARMS. MAX. @230VAC 122W LOAD
- INRUSH SURGE :
< 40 Ap-pl. @115Vac (Cold Start at 25 Degree)
< 70 Ap-pl. @230Vac (Cold Start at 25 Degree)
- OUTPUT WATTAGE :
@ Convection Rating:80 Watts MAX
@ With 15CFM Forced Air Rating :122 Watts MAX
- OVERSHOOT/UNDERSHOOT OUTPUT RANGE:
@ Turn-on / Turn-off---- <5%
|
|
|
| Note: |
1. |
PEAK CURRENT LASTING < 30SECS WITH A MAXIMUM 10% DUTY CYCLE |
| 2. |
CROSS/LOAD REGULATION IS TESTED AT 10% TO 100% OF RATED LOAD AND OTHER OUTPUTS ARE SET AT 50% OF RATED LOAD. |
| |
3. |
PEAK-TO-PEAK FOR 80W (CONVECTION RATING) @90VAC MIN ; 122W (WITH 15CFM FORCED ARI) @ 100VAC MIN; MEASUREMENTS WITH A 20MHZ BANDWIDTH AND TERMINATED WITH A 10UF ELECTROLYTIC CAP. IN PARALLEL WITH A 0.1UF CERAMIC CAP. |
| ENVIRONMENTAL: |
- OPERATING TEMPERATURE：0°C TO 40°C Ambient
- STORAGE TEMPERATURE：-40°C TO 85°C
- HUMIDITY：@ Non-Condensing form 5% TO 95%
- VIBRATION：Random Operating, 2.4 Grms/Max. 3 axes, 50~500Hz 10 minutes/axis
- SHOCK：Operating, Half Sine, 3 Axes, 10mS, 6 shocks total 20 Gpk/Max
|
| GENERAL SPECIFICATION: |
- EFFICIENCY : >78% @115 Vac with full Load ; >80% @ 230Vac With Full Load
- TURN-ON TIME: < 2 Sec @ 115Vac With Full Load
- HOLD-UP TIME: > 10mSec @ 115Vac With convection Rating
- MTBF DEMOSTRATED: > 100,000 Hours @ 25Degree With full Load , MIL-HDBK-217F
|
| ELECTROMAGNETIC COMPATIBILITY SPECIFICATIONS: |
- EMI CONDUCTED/RADIATED: FCC PART 15 & CISPR22 & EN55022 CLASS
- BDESIGNED TO MEET EN61000 -3-2, -3-3, -4-2, -4-4, -4-5, -4-6, -4-11,
|
| CONNECTOR TYPE & PIN ASSIGNMENTS |
| MECHANICAL DRAWING (5"x3"x1.5") |
|
|
