A simple, compact and reasonable cost to increase the charge current than conventional solar regulator.
MPPT Solar Charger: |
LTEMPPT12
|
- Quick replacement to standard regulators and bootsting output current by up to 30%
- Simple installment 10A output
- Auto-select for 12V and 24V panels and batteries
- Built in Laod switching configurable as a variable dawn to dusk or low voltage disconnect
- Remote Load control option and alarm
- Surge, PV short and reverse current Projection
|
Simple, compact and low cost alternative to increase the bulk charger current by more than 20% over conventiovalsolar regulators and eliminate noisy and imprecise charge regimes |
| Specifications |
| Input Voltage |
15.5V to 55V |
| Efficiency Typical |
97% |
| Output Voltage |
Float 14.5V / 29V |
| |
Sealed - LA Batteries 14.2V / 28.4V |
| Output Power |
200W @29V / 150W @ 14.4V |
| Quiescent Crttent |
0.04A |
| Thermal Protection |
Multi-level Type |
| PV Short and Suge Protection |
YES |
| Remote Control |
Yes With MCM |
| Alarm and Programming |
Yes With MCM |
| Dawn to Dusk or LVD |
YES |
| Indications |
Dual LED Display - Battery OK/LOW |
| Dimension |
|
|
LTEMPPT30
|
- Quick replacement to standard regulators and bootsting output current by up to 30%
- Simple installment 30A output
- Auto-select for 12V, 24V and 48V panels and batteries
- Dawn to dusk, low voltage disconnect, remote alarm and programming capability
- LCD display for Voltage and charge status (Optional)
- Triple chemistry vented, GEL and AGM cells
|
The 30 series is designed to automatically charge 12V, 24V and 48V sealed and vented lead acid batteries from silicon based PV panels such as mono-crystalline, polycrystalline and thin film. It has a build in Load Low Voltage Disconnect configurable as a Dawn to Dusk switching. It can be connected to the MCM for remote control and full system parameter logging and display. |
| Specifications |
| Input Voltage |
15.5V to 95V |
| Efficiency Typical |
96% |
| Output Voltage |
Float 13.5V / 27V , 54V |
| |
Absorption - Vented LA Batteries 14.5V / 29V / 58V |
| |
Sealed - LA Batteries 14.2V / 28.4V / 56.8V |
| Output Power |
1700W @ 30A Maximum |
| Quiescent Crttent |
0.05A |
| Thermal Protection |
Multi-level Type |
| PV Short and Suge Protection |
YES |
| Remote Control |
Yes With MCM |
| Alarm and Programming |
Yes With MCM |
| Dawn to Dusk or LVD |
YES |
| Indications |
Dual Display - Output Status |
| Dimension |
|
|
LTEMPPT60
|
- Quick replacement to standard regulators and bootsting output current by up to 30%
- Simple installment 60A output
- Auto-select for 12V, 24V and 48V panels and batteries
- Dawn to dusk, low voltage disconnect, remote alarm and programming capability
- LCD display for Voltage and charge status (Optional)
- Triple chemistry vented, GEL and AGM cells
|
The 60 series is designed to automatically charge 12V, 24V and 48V sealed and vented lead acid batteries from silicon based PV panels such as mono-crystalline, polycrystalline and thin film. It has a build in Load Low Voltage Disconnect configurable as a Dawn to Dusk switching. It can be connected to the MCM for remote control and full system parameter logging and display. |
| Specifications |
| Input Voltage |
15.5V to 95V |
| Efficiency Typical |
96% |
| Output Voltage |
Float 13.5V / 27V , 54V |
| |
Absorption - Vented LA Batteries 14.5V / 29V / 58V |
| |
Sealed - LA Batteries 14.2V / 28.4V / 56.8V |
| Output Power |
3400W @ 30A Maximum |
| Quiescent Crttent |
0.05A |
| Thermal Protection |
Multi-level Type |
| PV Short and Suge Protection |
YES |
| Remote Control |
Yes With MCM |
| Alarm and Programming |
Yes With MCM |
| Dawn to Dusk or LVD |
YES |
| Indications |
LED Display - Output Status |
| Dimension |
|
|
LTEMCM
|
- The MCMunits unleashed the full poteneial of the MPPT solar Battery Chargers
- Using this simple plug and play option allows a display of the solar system parameter as well as alarm settings
|
| Display |
Control |
| Battery voltage |
Load connect / disconnect |
| Battery current and amph |
Output voltage programming |
| Load current and amph |
Alarm (ot and lv) level setup |
| PV voltage |
Connectivity |
| Mppt temperatue |
PC via USB |
| Low battery voltage alarm |
PC GUI for all display and control |
| High Temperatue |
MPPT via standard 9 pin connector |
|
SYSTEM WIRING DIAGRAM
|
